Home Search

DriveWorks Pro 20
Edge Flange

Send Feedback

Edge Flange

This document describes the types of rules that can be applied to models that have advanced feature parameters captured.

Driving advanced feature dimensions increases model generation time. Where possible capture feature dimensions (distances, numbers and angles) as dimensions rather than an advanced feature parameter.

During model generation captured dimensions are driven before captured advanced feature parameters. If the advanced feature parameter has also been captured as a dimension the value being driven into the advanced feature parameter will override the captured dimension.

Edge Flange

ParameterInput TypeDescription
Auto Relief TypeOne of the following values:

None

Obround

Rectangle

Tear

Sets the auto-relief type for this edge flange
Bend AllowanceDistanceSets the value of the bend allowance
Bend DeductionDistanceSets the value of the bend deduction
Bend RadiusDistanceSets the bend radius of the edge flange
Bend AngleAngleSets the bend angle of the edge flange
Custom Bend Allowance TypeOne of the following values:

K-Factor

Bend Table

Bend Allowance

Bend Deduction

Sets the bend allowance type
Gap DistanceDistance Sets the gap distance of the tear for this edge flange feature
K-FactorDoubleSets the K-factor
Offset DimTypeOne of the following values:

Blind

UpToVertex

Sets the offset dimension type for this edge flange
Offset DistanceDistanceSets the offset distance for this edge flange
Offset TypeOne of the following values:

Blind

UpToVertex

Sets the offset type for this edge flange
Position Offset DistanceDistanceSets the Position offset distance for this edge flange
Position TypeOne of the following values:

BendOutside

BendSharp

MaterialInside

MaterialOutside

TangentBend

Sets the Position type for this edge flange
Relief DepthDistanceSets the relief depth of the edge flange
Relief RatioDoubleSets the relief ratio for this edge flange
Relief WidthDistanceSets the width of the relief for this edge flange
Relief Tear TypeOne of the following values:

Rip

Tear

Sets the type of relief tear for this edge flange feature
Reverse OffsetTrue/FalseSets the reverse offset for this edge flange
Reverse Position OffsetTrue/FalseSets the reverse Position offset for this edge flange
Use Default Bend AllowanceTrue/FalseSets whether to use the default bend allowance for this edge flange
Use Position OffsetTrue/FalseSets the Use Position Offset for this edge flange
Use Relief RatioTrue/FalseSets the Use Relief Ratio for this edge flange
Use Default Bend RadiusTrue/FalseSets the Use Default Bend for this edge flange
Use Default Bend ReliefTrue/FalseSets the Use Default Bend Relief for this edge flange
Use Position Trim Side BendsTrue/FalseSets the Use Trim Side Bends for this edge flange