This document describes the types of rules that can be applied to models that have advanced feature parameters captured.
Driving advanced feature dimensions increases model generation time. Where possible capture feature dimensions (distances, numbers and angles) as dimensions rather than an advanced feature parameter.
During model generation captured dimensions are driven before captured advanced feature parameters. If the advanced feature parameter has also been captured as a dimension the value being driven into the advanced feature parameter will override the captured dimension.
| Parameter | Input Type | Description |
|---|---|---|
| Both Directions | True/False | Set whether the extrusion is in both directions |
| Cap Ends | True/False | Caps the ends for a thin base extrude feature |
| Cap Thickness | Distance | Sets the end cap thickness for a thin base extrude feature |
| D1 Apply Draft | True/False | Determines whether a draft is applied in direction 1 |
| D1 Draft Angle | Angle | Set the Draft Angle for the extrusion in direction1 |
| D1 Draft Outward | True/False | Sets if extrude D1 has outward draft |
| D1 End Condition | One of the following values: Blind ThroughAll ThroughNext MidPlane | Sets end condition for D1 |
| D1 Reverse Offset | True/False | Sets direction in D1 |
| D1 Translate Surface | True/False | Sets the translate surface setting for this extrude feature in D1 |
| D1 Wall Thickness | Distance | Set the wall thickness of the thin extrusion feature D1 |
| D1 Depth | Distance | Set the Depth for the extrusion in direction1 |
| D2 Apply Draft | True/False | Determines whether a draft is applied in direction 2 |
| D2 Depth | Distance | Set the Depth for the extrusion in direction2 |
| D2 Draft Angle | Angle | Set the Draft Angle for the extrusion in direction2 |
| D2 Draft Outward | True/False | Sets if extrude D2 has outward draft |
| D2 End Condition | One of the following values: Blind ThroughAll ThroughNext MidPlane | Sets end condition for D2 |
| D2 Reverse Offset | True/False | Sets direction in D2 |
| D2 Translate Surface | True/False | Sets the translate surface setting for this extrude feature in D2 |
| D2 Wall Thickness | Distance | Set the wall thickness of the thin extrusion feature D2 |
| From Offset Distance | Distance | Sets the offset distance |
| From Offset Reverse | True/False | Sets whether the offset is reverse for this extrusion |
| From Type | One of the following values: SketchPlane Offset | Sets the type from which to create an extrusion |
| Merge | True/False | Sets whether to merge the results of the extrude feature in a multibody part |
| Reverse Direction | True/False | Sets whether to reverse the direction of the extrusion feature |
| Thin Wall Type | One of the following values: OneDirection OppDirection MidPlane TwoDirection | Sets the thin wall type for a thin base extrude feature |
| Auto Fillet | True/False | True to automatically fillet edges, false to not |
| Radius | Radius Value | Sets the radius value of the fillet (Please note, Auto Fillet advanced feature parameter must be set to true) |