Home Search

DriveWorks Pro 22
Cosmetic Thread Features

Send Feedback

Cosmetic Thread Features

This document describes the types of rules that can be applied to models that have advanced feature parameters captured.

Driving advanced feature dimensions increases model generation time. Where possible capture feature dimensions (distances, numbers and angles) as dimensions rather than an advanced feature parameter.

During model generation captured dimensions are driven before captured advanced feature parameters. If the advanced feature parameter has also been captured as a dimension the value being driven into the advanced feature parameter will override the captured dimension.

Cosmetic Threads

ParameterInputDescription
End ConditionOne of the following values:

  • 0 = Blind
  • 1 = UpToNext
  • 2 = ThroughFeature

Sets how to apply the cosmetic thread end condition
Blind Depth50The depth to apply to the Cosmetic Thread.

End Condition must be set to 0 (Blind)

StandardOne of the following values:

  • -2 = StandardNone
  • 0 = StandardAnsiInch
  • 1 = StandardAnsiMetric
  • 2 = StandardBSI
  • 3 = StandardDME
  • 4 = StandardDIN
  • 5 = StandardHascoMetric
  • 6 = StandardHelicoilInch
  • 7 = StandardHelicoilMetric
  • 8 = StandardISO
  • 9 = StandardJIS
  • 10 = StandardPCS
  • 11 = StandardProgressive
  • 12 = StandardSuperior
  • 13 = StandardGB
  • 14 = StandardKS
  • 15 = StandardIS
  • 16 = StandardAS

Sets the thread standard
Standard TypeOne of the following values:

  • Machine Threads
  • Straight Pipe Tapped Thread

Sets the thread standard type
SizeOne of the following values (dependent on cylinder diameter):

  • E.g M20x1.5
  • M20x2.0
  • M64x6.0

Sets the thread size